AXLE AND DIFFERENTIAL REAR AXLE HUB INSTALLATION
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the same procedure for the RH side and LH side.
·The following procedure is for the LH side.
PROCEDURE
42450B 1.INSTALL REAR AXLE HUB AND BEARING ASSEMBLY
a.
Install the rear axle hub and bearing assembly and rear disc brake dust cover sub-assembly to the rear axle beam assembly with the 4 bolts.
- Torque:
- 100 N*m (1020 kgf*cm, 74 ft.*lbf)
2.INSPECT REAR AXLE HUB BEARING LOOSENESS
3.INSPECT REAR AXLE HUB RUNOUT
42431 4.INSTALL REAR DISC
5.INSTALL REAR DISC BRAKE CALIPER ASSEMBLY
46430 6.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
7.ADJUST PARKING BRAKE
58804A 8.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
89516D 9.CONNECT SKID CONTROL SENSOR WIRE (w/ ABS)
10.INSTALL REAR WHEEL
11.CHECK FOR SPEED SENSOR SIGNAL (w/ ABS)