BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS VEHICLE STABILITY CONTROL SYSTEM C1433 Steering Angle Sensor Internal Circuit
DESCRIPTION
This DTC is stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the steering angle sensor.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| C1433 | Steering Angle Sensor Internal Circuit | With the IG1 terminal voltage between 9.5 and 17.4 V, a skid control ECU (brake actuator assembly) receives an error signal from the steering angle sensor. | Steering angle sensor |
PROCEDURE
1.REPLACE STEERING ANGLE SENSOR
a.
Replace the steering angle sensor.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>STEERING ANGLE SENSOR>REMOVAL
- HINT:
-
If troubleshooting has been carried out according to Problem Symptoms Table, refer back to the table and proceed to the next step before replacing parts.
- Result:
Proceed to NEXT
NEXT
END