LIGHTING (EXT)  HEIGHT CONTROL SENSOR  INSTALLATION  


PROCEDURE

Hide 89408B 1.INSTALL REAR HEIGHT CONTROL SENSOR SUB-ASSEMBLY

a.

Install the rear height control sensor sub-assembly with the bolt and nut.

Torque:
Bolt : 19 N*m (194 kgf*cm, 14 ft.*lbf)
Nut : 8.0 N*m (82 kgf*cm, 71 in.*lbf)


b.

Connect the connector.


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION