STEERING COLUMN  STEERING WHEEL  REMOVAL  


CAUTION / NOTICE / HINT

NOTICE:
w/ VSC:
·

Do not replace the spiral cable with sensor sub-assembly with the battery connected and the ignition switch ON.

·

Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly with the battery connected and the ignition switch ON.

·

Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.

·

Do not remove the steering sensor from the spiral cable.



PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 45130 3.REMOVE HORN BUTTON ASSEMBLY

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>STEERING PAD>REMOVAL

Hide 4.REMOVE STEERING WHEEL ASSEMBLY

a.
C292309C01
1.708,0.5 0.667,0.448 0.667,0.448 1.708,0.448 true 0.5,0.365 0.813,0.521 0.313,0.156 10 false *a
*a Matchmark


Remove the steering wheel assembly set nut.


b.

Put matchmarks on the steering wheel assembly and steering main shaft.


c.

Disconnect each connector from the spiral cable sub-assembly.


d.
C292310C01
2.146,0.698 2.719,0.698 true 1.875,2.323 2.583,2.323 true 1.833,2.99 2.146,3.146 0.313,0.156 10 false *a 0.208,2.302 0.521,2.458 0.313,0.156 10 false *b 2.604,2.24 3.01,2.448 0.406,0.208 10 true SST 2.76,0.625 3.167,0.833 0.406,0.208 10 true SST
*a Turn
*b Hold


Using SST, remove the steering wheel assembly.

SST
09950-50013  (09951-05010, 09952-05010, 09953-05020, 09954-05070)

NOTICE:

Apply a small amount of grease to the threads and tip of SST (09953-05020) before use.



Hide 84250A 5.REMOVE STEERING PAD SWITCH ASSEMBLY (w/ Steering Pad Switch)

Click hereSteering>STEERING COLUMN>STEERING PAD SWITCH>REMOVAL

Hide 84632 6.REMOVE CRUISE CONTROL MAIN SWITCH (w/ Cruise Control System)

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL MAIN SWITCH>REMOVAL

Hide 84633 7.REMOVE CRUISE CONTROL SWITCH WIRE (w/ Cruise Control System)

a.

Remove the cruise control switch wire.


Hide 84610F 8.REMOVE SHIFT PADDLE SWITCH (TRANSMISSION SHIFT SWITCH ASSEMBLY) (w/ Shift Paddle Switch)

a.
C278729C01
1.031,1.417 1.646,1.188 false 0.854,1.344 1.042,1.521 0.188,0.177 10 *a
*a Guide


Remove the 2 screws from the steering wheel assembly.


b.

Disengage the guide from the steering wheel assembly.


c.
C270617

Disengage the 5 guides to remove the 2 shift paddle switches (transmission shift switch assemblies) with No. 1 switch wire from the steering wheel assembly.