K313 CVT PARK / NEUTRAL POSITION SWITCH INSTALLATION
PROCEDURE
84540
1.INSTALL PARK/NEUTRAL POSITION SWITCH ASSEMBLY
Temporarily install the park/neutral position switch assembly to the continuously variable transaxle assembly with the 2 bolts.
Install the lock plate and lock nut to the park/neutral position switch assembly.
- Torque:
- 6.9 N*m (70 kgf*cm, 61 in.*lbf)
Temporarily install the control shaft lever.
| *a | P Position |
| *b | N Position |
Turn the control shaft lever clockwise until it stops, then turn it counterclockwise 2 notches.
Remove the control shaft lever from the park/neutral position switch assembly.
| *a | Neutral Basic Line |
| *b | Indicator |
Align the indicator with the neutral basic line.
Hold the park/neutral position switch assembly in that position and tighten the 2 bolts.
- Torque:
- 5.4 N*m (55 kgf*cm, 48 in.*lbf)
Using a screwdriver, stake the lock nut with the lock plate.
Install the control shaft lever to the park/neutral position switch assembly with the nut and washer.
- Torque:
- 12.7 N*m (130 kgf*cm, 9 ft.*lbf)
Connect the park/neutral position switch assembly connector.
33820B
2.INSTALL TRANSMISSION CONTROL CABLE ASSEMBLY
Install the transmission control cable assembly to the No. 1 transmission control cable bracket with a new clip.
Install the transmission control cable assembly to the control shaft lever with the nut.
- Torque:
- 12 N*m (122 kgf*cm, 9 ft.*lbf)
74411
3.INSTALL BATTERY CARRIER
28800
4.INSTALL BATTERY
17701
5.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17705
6.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
11212
7.INSTALL NO. 2 CYLINDER HEAD COVER
8.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Connect the cable to the negative (-) battery terminal.
- Torque:
- 5.4 N*m (55 kgf*cm, 48 in.*lbf)
84540
9.INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY OPERATION
84540
10.ADJUST PARK/NEUTRAL POSITION SWITCH ASSEMBLY
11.INSPECT SHIFT LEVER POSITION
12.ADJUST SHIFT LEVER POSITION