1ZR-FE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11101W 1.INSTALL CAMSHAFT POSITION SENSOR

a.

for Intake Side:

i.
A231950C04
1.708,0.51 1.427,0.198 1.427,0.198 1.167,0.198 false 0.979,0.115 1.292,0.313 0.313,0.198 10 false *a
*a O-ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

NOTICE:

If reusing the camshaft position sensor, be sure to inspect the O-ring.



ii.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or does not move out of place during installation.




iii.

Connect the camshaft position sensor connector.



b.

for Exhaust Side:

i.
A231950C04
1.708,0.51 1.427,0.198 1.427,0.198 1.167,0.198 false 0.979,0.115 1.292,0.313 0.313,0.198 10 false *a
*a O-ring


Apply a light coat of engine oil to the O-ring of the camshaft position sensor.

NOTICE:

If reusing the camshaft position sensor, be sure to inspect the O-ring.



ii.

Install the camshaft position sensor to the cylinder head cover sub-assembly with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:
·

If the camshaft position sensor has been struck or dropped, replace it.

·

Make sure that the O-ring is not cracked or does not move out of place during installation.




iii.

Connect the camshaft position sensor connector.



Hide 11212 3.INSTALL NO. 2 CYLINDER HEAD COVER

Click hereEngine / Hybrid System>1ZR-FE ENGINE MECHANICAL>ENGINE ASSEMBLY>INSTALLATION