EXTERIOR PANELS / TRIM  FRONT BUMPER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FRONT BUMPER ASSEMBLY

a.
B444960

Move the front bumper assembly into position and engage the 2 claws as shown in the illustration.


b.

Install the 3 clips.


c.

Pull back the side of the front bumper assembly and connect the connector.

NOTICE:

Do not apply excessive force when pulling back the front bumper assembly.


HINT:

Use the same procedure for the RH side and LH side.



d.
B444957

Engage the 4 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



e.

Install the 6 screws.


f.
B444970C01
1.625,2.177 1.594,1.938 true 1.552,2.198 1.792,2.375 0.24,0.177 10 true *1 2.281,2.083 2.594,2.24 0.313,0.156 10 false *a 3.01,2.083 3.323,2.24 0.313,0.156 10 false *b
*1 Pin Hold Clip
*a Correct
*b Incorrect


Install the pin hold clip as shown in the illustration.

NOTICE:

Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.


HINT:

Use the same procedure for the RH side and LH side.



g.

Install the front bumper assembly with the clip.

HINT:

Use the same procedure for the RH side and LH side.



Hide 2.INSTALL RADIATOR GRILLE SUB-ASSEMBLY

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>RADIATOR GRILLE>INSTALLATION

Hide 3.ADJUST FOG LIGHT ASSEMBLY (w/ Fog Light)

Click hereVehicle Exterior>LIGHTING (EXT)>FOG LIGHT ASSEMBLY>ADJUSTMENT