CRUISE CONTROL  CRUISE CONTROL SYSTEM  SYSTEM DESCRIPTION  


CRUISE CONTROL SYSTEM


This system is controlled by the ECM, and control is performed using the throttle position sensor and motor. The ECM controls the following functions: ON-OFF, - (COAST)/SET, + (ACCEL)/RES (RESUME), CANCEL and vehicle speed operation.

·

The ECM compares the vehicle speed from the speed sensor with the stored vehicle speed set using the cruise control main switch. The ECM instructs the throttle valve motor of the throttle body assembly to close the valve when the vehicle speed is greater than the stored vehicle speed, and instructs it to open the valve when the vehicle speed is less than the stored vehicle speed.

·

The ECM receives signals such as ON-OFF, - (COAST)/SET, + (ACCEL)/RES (RESUME), and CANCEL from the cruise control main switch and executes the command.

·

The ECM illuminates the combination meter assembly cruise control indicator in green when the cruise control system is turned on using the cruise control main switch (ON-OFF button).

·

The ECM turns off the combination meter assembly cruise control indicator (green) and displays a warning message is displayed when a malfunction occurs during cruise control driving.

·
A229932C01
2.083,0.396 2.323,0.604 0.24,0.208 10 *1 2.115,1.385 2.385,1.615 0.271,0.229 10 *2
*1 Cruise Control Indicator (Illuminated in Green)
*2 Cruise Control SET Indicator


The ECM illuminates the combination meter assembly cruise control SET indicator when control of vehicle speed begins after the cruise control main switch is pushed to -/SET while driving.

·

The ECM cancels control of vehicle speed when the brake pedal is depressed and the ECM receives a signal from the stop light switch assembly.

·

The ECM cancels control of vehicle speed when the shift lever is moved from D or M to any other position.

·

The ECM cancels control of vehicle speed when the shift lever is used to select the 3rd, 2nd, or 1st range with the shift lever in M.

·

The ECM cancels control of vehicle speed when the transmission shift switch assembly is used to select the 3rd, 2nd, or 1st range with the shift lever in M. (w/ Shift Paddle Switch)

·

The ECM cancels control of vehicle speed when the transmission shift switch assembly is used to select the 3rd, 2nd or 1st range with the shift lever in D. (w/ Shift Paddle Switch)

·

The ECM cancels control of vehicle speed when the cruise control main switch is pulled to CANCEL.

·

The ECM cancels control of vehicle speed when the cruise control system is turned off using the cruise control main switch (ON-OFF button).



LIMIT CONTROL


a.

Low speed limit

The lowest possible set speed is approximately 40 km/h (25 mph). The cruise control system cannot be set when the vehicle speed is below the low speed limit. Control of vehicle speed will be automatically canceled but the stored vehicle speed will be retained when the vehicle speed drops below the low speed limit while the cruise control is controlling vehicle speed.


b.

High speed limit

The highest possible set speed is approximately 200 km/h (124 mph). The cruise control system cannot be set when the vehicle speed is over the high speed limit. Also, + (ACCEL)/RES (RESUME) cannot be used to increase the speed beyond the high speed limit.



OPERATION OF CRUISE CONTROL


The cruise control main switch is used to turn the cruise control system on and off, as well as operate 7 functions: SET, - (COAST), TAP-DOWN, RES (RESUME), + (ACCEL), TAP-UP, and CANCEL. The SET, TAP-DOWN, and - (COAST) functions, and the RES (RESUME), TAP-UP, and + (ACCEL) functions are operated with the same switch. The cruise control main switch is an automatic return type switch which turns on only while operating it in the direction of each arrow, and turns off after it is released.

a.

SET CONTROL

The vehicle speed is stored and speed control begins when the cruise control main switch is pushed to -/SET while driving with the cruise control system on (while the cruise control indicator is illuminated in green), and the vehicle speed is within the set speed range (between the low and high speed limits).


b.

- (COAST) CONTROL

When the cruise control system is controlling vehicle speed and the cruise control main switch is pushed to -/SET and held in that position, the cruise control system sends a "throttle valve opening angle 0°" demand signal to the ECM. Following this, the vehicle speed is stored and maintained when the cruise control main switch is released.

HINT:

An actual throttle valve opening angle of 0° is not possible due to items such as idle speed control.



c.

TAP-DOWN CONTROL

When the cruise control system is controlling vehicle speed and the cruise control main switch is tapped to -/SET (for approximately 0.6 seconds), the stored vehicle speed decreases by approximately 1.6 km/h (1.0 mph) for each time the switch is tapped. When the cruise control main switch is tapped to -/SET and the difference between the current and stored vehicle speed is more than 5 km/h (approximately 3 mph), the current vehicle speed is stored and speed control is performed.


d.

ACCELERATION CONTROL

When the cruise control system is controlling vehicle speed and the cruise control main switch is pushed to +/RES and held in that position, the cruise control system sends a signal to the ECM to operate the throttle valve motor of the throttle body assembly to open the throttle valve. Following this, the vehicle speed is stored and maintained when the cruise control main switch is released.


e.

TAP-UP CONTROL

When the cruise control system is controlling vehicle speed and the cruise control main switch is tapped to +/RES (for approximately 0.6 seconds), the stored vehicle speed increases by approximately 1.6 km/h (1.0 mph) for each time the switch is tapped. When the cruise control main switch is tapped to +/RES and the difference between the current and stored vehicle speed is more than 5 km/h (approximately 3 mph), the stored vehicle speed will not be changed.


f.

RESUME CONTROL

If cruise control system control of vehicle speed was canceled due to any of the manual cancel conditions (other than turning the cruise control system off using the cruise control main switch (ON-OFF button)), and if the vehicle speed is between the low and high speed limits, the stored vehicle speed from the time of cancellation will be resumed and maintained when the cruise control main switch is pushed to +/RES.


g.

MANUAL CANCEL CONTROL

Performing any of the following cancels the cruise control system control of vehicle speed (the stored vehicle speed in the ECM is maintained).

·

Depressing the brake pedal.

·

Moving the shift lever from D or M to any other position.

·

Selecting the 3rd, 2nd or 1st range using the shift lever with the shift lever in M.

·

Selecting the 3rd, 2nd or 1st range using the transmission shift switch assembly with the shift lever in M. (w/ Shift Paddle Switch)

·

Selecting the 3rd, 2nd or 1st range using the transmission shift switch assembly with the shift lever in D. (w/ Shift Paddle Switch)

·

Pulling the cruise control main switch to CANCEL.

·

Turning the cruise control system off using the cruise control main switch (ON-OFF button) (the stored vehicle speed in the ECM is not maintained).




AUTO CANCEL (FAIL-SAFE)


This system has an automatic cancellation function (fail-safe).

Click hereEngine / Hybrid System>CRUISE CONTROL>CRUISE CONTROL SYSTEM>FAIL-SAFE CHART