HEATING / AIR CONDITIONING AIR CONDITIONING SYSTEM(for Manual Air Conditioning System) HOW TO PROCEED WITH TROUBLESHOOTING
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the following procedure to troubleshoot the air conditioning system.
·*: Use the GTS.
PROCEDURE
- Result:
Proceed to NEXT
NEXT
Inspect the battery voltage.
- Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the battery before proceeding to the next step.
- Result:
Proceed to NEXT
NEXT
Using the GTS, check for CAN communication system DTCs.
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
- Result:
Result Proceed to CAN communication system DTCs are not output A CAN communication system DTCs are output B
A
B
Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>HOW TO PROCEED WITH TROUBLESHOOTING
Check for DTCs and note any codes that are output.
- Body Electrical > Air Conditioner > Trouble Codes
- 50001 121
Clear the DTCs.
- Body Electrical > Air Conditioner > Clear DTCs
- 50002 121
Recheck for DTCs. Based on the DTCs output above, try to force output of the air conditioning system DTC by simulating the operation indicated by the DTC.
- Body Electrical > Air Conditioner > Trouble Codes
- 50001 121
- Result:
Result Proceed to DTCs are not output A DTCs are output B
A
B
Refer to Problem Symptoms Table.
- Result:
Result Proceed to Fault is not listed in Problem Symptoms Table A Fault is listed in Problem Symptoms Table B
A
B
Data List / Active Test
On-vehicle Inspection
Inspection
- Result:
Proceed to NEXT
NEXT
- Result:
Proceed to NEXT
NEXT