2NZ-FE ENGINE CONTROL ENGINE COOLANT TEMPERATURE SENSOR INSTALLATION
PROCEDURE
89422
1.INSTALL ENGINE COOLANT TEMPERATURE SENSOR
a.
Install a new gasket to the engine coolant temperature sensor.
b.
Using a 19 mm union nut wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.
- Torque:
- 19.6 N*m (200 kgf*cm, 14 ft.*lbf)
- NOTICE:
-
If the engine coolant temperature sensor has been struck or dropped, replace it.
c.
Connect the engine coolant temperature sensor connector.
17701
2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17705
3.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
4.ADD ENGINE COOLANT
5.INSPECT FOR COOLANT LEAK
11212
6.INSTALL NO. 2 CYLINDER HEAD COVER