2NZ-FE ENGINE CONTROL CAMSHAFT POSITION SENSOR INSTALLATION
PROCEDURE
11101E 1.INSTALL CAMSHAFT POSITION SENSOR
a.
1.708,0.51 1.427,0.198
1.427,0.198 1.167,0.198
false
*a | O-ring |
Apply a light coat of engine oil to the O-ring of the camshaft position sensor.
- NOTICE:
-
If reusing the camshaft position sensor, be sure to inspect the O-ring.
b.
Install the camshaft position sensor to the cylinder head sub-assembly with the bolt.
- Torque:
- 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- NOTICE:
- ·
If the camshaft position sensor has been struck or dropped, replace it.
·Make sure that the O-ring is not cracked or does not move out of place during installation.
c.
Connect the camshaft position sensor connector.
17701 2.INSTALL AIR CLEANER CASE SUB-ASSEMBLY
17705 3.INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
4.INSPECT FOR OIL LEAK
11212 5.INSTALL NO. 2 CYLINDER HEAD COVER