Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

NOTICE:

Do not damage the O-ring.

Install the camshaft timing oil control valve assembly to the cylinder head sub-assembly with the bolt.

Torque:

7.5 N*m (76 kgf*cm, 66 in.*lbf)

NOTICE:

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head sub-assembly).

·

Make sure that the O-ring is not cracked or does not move out of place during installation.

Connect the camshaft timing oil control valve assembly connector.