1ZR-FE ENGINE CONTROL IGNITION COIL AND SPARK PLUG INSTALLATION
PROCEDURE
19100P
1.INSTALL SPARK PLUG
a.
Using a 14 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly.
- Torque:
- 20 N*m (204 kgf*cm, 15 ft.*lbf)
- NOTICE:
-
If a spark plug has been struck or dropped, replace it.
- HINT:
-
Install the same parts to their original positions.
19500
2.INSTALL IGNITION COIL ASSEMBLY
a.
Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
- Torque:
- 10 N*m (102 kgf*cm, 7 ft.*lbf)
- NOTICE:
-
If an ignition coil assembly has been struck or dropped, replace it.
- HINT:
-
Install the same parts to their original positions.
b.
Connect the 4 ignition coil assembly connectors.
11212
3.INSTALL NO. 2 CYLINDER HEAD COVER