EXTERIOR PANELS / TRIM FRONT DOOR WINDOW FRAME MOULDING REMOVAL
CAUTION / NOTICE / HINT
- HINT:
- ·
Use the same procedure for the RH side and LH side.
·The following procedure is for the LH side.
PROCEDURE
75720 1.REMOVE FRONT DOOR BELT MOULDING ASSEMBLY
67862 2.DISCONNECT FRONT DOOR WEATHERSTRIP
Using a clip remover, disengage the clip and disconnect the front door weatherstrip.
75756C 3.REMOVE FRONT DOOR REAR WINDOW FRAME MOULDING
- HINT:
-
When removing the front door rear window frame moulding, heat the vehicle body and front door rear window frame moulding using a heat light.
Item | Temperature |
---|---|
Vehicle Body | 40 to 60°C (104 to 140°F) |
Front Door Rear Window Frame Moulding | 20 to 30°C (68 to 86°F) |
- NOTICE:
-
Do not heat the vehicle body or front door rear window frame moulding excessively.
Using a heat light, heat the front door rear window frame moulding.
Double-sided Tape |
Using a moulding remover, disengage the clip and guide, and separate the double-sided tape to remove the front door rear window frame moulding.