WINDOW / GLASS POWER WINDOW REGULATOR MOTOR(for Front Door) INSTALLATION

CAUTION / NOTICE / HINT

HINT:: ·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the RH side.

Hide Display 1. PRECAUTION

NOTICE:: After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.; Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

Hide Display 85710E 2.INSTALL FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY

Hide Display 3.INSTALL FRONT DOOR WINDOW REGULATOR ASSEMBLY

Hide Display 68101 4.INSTALL FRONT DOOR GLASS SUB-ASSEMBLY

Hide Display 67831 5.INSTALL FRONT DOOR SERVICE HOLE COVER

Hide Display 67601 6.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY

Hide Display 67491A 7.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH

Hide Display 8.INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Driver Side)

Hide Display 9.INSTALL POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL (for Front Passenger Side)

Hide Display 74210 10.INSTALL FRONT ARMREST ASSEMBLY

Hide Display 74645A 11.INSTALL DOOR ASSIST GRIP COVER

Hide Display 12.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:: When disconnecting the cable, some systems need to be initialized after the cable is reconnected.; Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION

Hide Display 13.INITIALIZE POWER WINDOW CONTROL SYSTEM

Hide Display 14.INSPECT POWER WINDOW OPERATION