EXTERIOR PANELS / TRIM  FRONT BUMPER  REMOVAL  


PROCEDURE

Hide 1.REMOVE RADIATOR GRILLE SUB-ASSEMBLY

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>RADIATOR GRILLE>REMOVAL

Hide 2.REMOVE FRONT BUMPER ASSEMBLY

a.
B466973C03
0,0 0,0 false
V100155

Protective Tape


Apply protective tape around the front bumper assembly as shown in the illustration.


b.
B444954C01
1.615,2.135 1.583,1.917 true 1.542,2.156 1.771,2.344 0.229,0.188 10 true *1 2.917,2.25 3.229,2.406 0.313,0.156 10 false *a
*1 Pin Hold Clip
*a 90°


Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.

HINT:

Use the same procedure for the RH side and LH side.



c.

Remove the clip.

HINT:

Use the same procedure for the RH side and LH side.



d.
B466974

Remove the 6 screws.


e.
B444956

Disengage the 4 claws as shown in the illustration.

HINT:

Use the same procedure for the RH side and LH side.



f.

Pull back the side of the front bumper assembly and disconnect the connector.

NOTICE:

Do not apply excessive force when pulling back the front bumper assembly.


HINT:

Use the same procedure for the RH side and LH side.



g.
B444958

Using a clip remover, remove the 3 clips.


h.
B444959

Disengage the 2 claws.


i.

Remove the front bumper assembly as shown in the illustration.