LIGHTING (INT) LIGHTING SYSTEM SYSTEM DESCRIPTION
ILLUMINATED ENTRY SYSTEM
The illuminated entry system has the following control functions:
| Control | Outline | Lights that Operate |
|---|---|---|
| Actuation Area-linked*1 | When a registered key enters any actuation area around the doors, the lights that operate turn on. | ·
Engine Switch Illumination ·
No. 1 Room Light Assembly |
| When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off. | ||
| Engine Switch-linked*1 | When the engine switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on. | ·
Engine Switch Illumination ·
No. 1 Room Light Assembly |
| When the engine switch is turned from off to on (ACC) or on (IG), the lights that operate turn off. | ||
| Ignition Switch-linked*2 | When the ignition switch is turned from ON or ACC to off, the lights that operate turn on. | ·
Transponder Key Coil ·
No. 1 Room Light Assembly |
| When the ignition switch is turned from off to ON or ACC, the lights that operate turn off. | ||
| Door Lock/Unlock-linked | When any door is unlocked, the lights that operate turn on. | ·
Transponder Key Coil*2 ·
No. 1 Room Light Assembly ·
Engine Switch Illumination*1 |
| When all doors are locked, the lights that operate turn off. | ||
| Door Open/Close-linked | When any door is opened, the lights that operate turn on. | ·
Transponder Key Coil*2 ·
No. 1 Room Light Assembly ·
Engine Switch Illumination*1 |
| When all doors are closed, the lights that operate turn off. | ||
| Delay | When approximately 15 seconds elapse after any of the following conditions is met, the lights that operate turn off:
·
An actuation area-linked function is used.*1 ·
The door unlock-linked function is active. ·
Any door is opened and then all doors are closed when the ignition switch is off. ·
The ignition switch is turned off when all doors are closed. |
·
Transponder Key Coil*2 ·
No. 1 Room Light Assembly ·
Engine Switch Illumination*1 |
*1: w/ Smart Entry and Start System
*2: w/o Smart Entry and Start System
BATTERY SAVING FUNCTION
The battery saving function has the following control functions:
| Control | Outline | Lights that Operate |
|---|---|---|
| Battery Saving | When 20 minutes elapse after the ignition switch is turned from ACC or ON to off and the lights that operate remain on, the lights are turned off.
|
·
Transponder Key Coil*3 ·
Map Light Assembly ·
No. 1 Room Light Assembly ·
No. 2 Room Light Assembly*2 ·
No. 1 Luggage Compartment Light Assembly ·
Vanity Light Assembly LH and RH*1 ·
Engine Switch Illumination*2 |
*1: w/ Vanity Light
*2: w/ Smart Entry and Start System
*3: w/o Smart Entry and Start System