LIGHTING (EXT) HEADLIGHT LEVELING ECU INSTALLATION
PROCEDURE
89960 1.INSTALL HEADLIGHT LEVELING ECU ASSEMBLY
a.
Connect the connector.
b.
Engage the guide to temporarily install the headlight leveling ECU assembly.
c.
Install the headlight leveling ECU assembly with the bolt.
- Torque:
- 8.0 N*m (82 kgf*cm, 71 in.*lbf)
2.INSTALL INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY WITH MAIN BODY ECU
55550 3.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
4.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- NOTICE:
-
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
-
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION
5. INITIALIZE HEIGHT CONTROL SENSOR SIGNAL
6.ADJUST HEADLIGHT AIMING