2ZR-FE ENGINE MECHANICAL DRIVE BELT ON-VEHICLE INSPECTION
PROCEDURE
16361A
1.INSPECT V-RIBBED BELT
a.
Check the V-ribbed belt for wear, cracks or other signs of damage.
If any of the following defects is found, replace the V-ribbed belt:
·
The V-ribbed belt is cracked.
·
The V-ribbed belt is worn out to the extent that the cords are exposed.
·
The V-ribbed belt has chunks missing from the ribs.
b.
0.573,1.354 0.885,1.51
0.313,0.156
10
*a
2.271,1.375 2.583,1.531
0.313,0.156
10
*b
| *a | Correct |
| *b | Incorrect |
Check that the V-ribbed belt fits properly in the ribbed grooves.
- HINT:
-
Check with your hand to confirm that the V-ribbed belt has not slipped out of the groove on the bottom of the pulley. If it has slipped out, replace the V-ribbed belt. Install a new V-ribbed belt correctly.