METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE METER / GAUGE SYSTEM


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Warning, Display or Unit conversion.


v.

Select the setting by referring to the table below.

NOTICE:

Record the current setting before customizing.


Warning
Tester Display Description Default Setting ECU
Key Remind Sound Function to change the frequency of the key reminder warning buzzer*4 Normal 00:Normal,01:Slow,10:Fast Combination meter assembly
50006 7
Display
Tester Display Description Default Setting ECU
ECO Drive Indicator Zone Function to change the eco drive indicator zone*1 ON 0:OFF,1:ON Combination meter assembly
ODO Display Time After IG OFF Setting Function to change the odometer display time after the ignition switch is turned off 30s 00:30s,01:60s,10:600s,11:OFF Combination meter assembly
50006 14
Unit conversion
Tester Display Description Default Setting ECU
Units By Region Function to change the units on the display*2 *3 000:Km/l JP,100:Km/l,010:Ml/g US,110:Ml/g UK,001:km/g Combination meter assembly
50006 15

*1: for CVT or Automatic Transaxle

*2: for Multi-information Display (Segment LCD Type)

*3: Changes according to the vehicle specification

*4: This item is displayed on the Techstream, but does not apply to vehicles with a Smart Entry and Start System.