Install a new gasket to the engine coolant temperature sensor.

Using a 19 mm union nut wrench, install the engine coolant temperature sensor to the cylinder head sub-assembly.

Torque:

19.6 N*m (200 kgf*cm, 14 ft.*lbf)

NOTICE:

·

If the engine coolant temperature sensor has been struck or dropped, replace it.

·

Use the torque value compensation formula to calculate the torque value for use when a torque wrench is combined with a tool such as a union nut wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

Perform "Inspection After Repair" after replacing the engine coolant temperature sensor.

Click hereEngine / Hybrid System>2ZR-FE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION