Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

NOTICE:

Do not damage the O-ring.

Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

Torque:

10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

Make sure that the O-ring is not cracked or does not move out of place during installation.

Connect the camshaft timing oil control valve assembly connector.

Apply a light coat of engine oil to a new O-ring and install it to the camshaft timing oil control valve assembly.

NOTICE:

Do not damage the O-ring.

Install the camshaft timing oil control valve assembly and wire harness bracket to the cylinder head cover sub-assembly with the bolt.

Torque:

10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

·

If the camshaft timing oil control valve assembly has been struck or dropped, replace it.

·

Do not allow foreign matter to contact the oil seal face of the camshaft timing oil control valve assembly (connecting surface with the cylinder head cover sub-assembly).

·

Make sure that the O-ring is not cracked or does not move out of place during installation.

Connect the camshaft timing oil control valve assembly connector.