U340E AUTOMATIC TRANSMISSION / TRANSAXLE SHIFT LEVER DISASSEMBLY
PROCEDURE
35907 1.REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY
Disengage the 4 claws to remove the floor shift position indicator housing sub-assembly from the lower position indicator housing.
- NOTICE:
-
Do not damage the lower position indicator housing.
35953 2.REMOVE POSITION INDICATOR LIGHT GUIDE
Disengage the 4 claws to remove the position indicator light guide from the lower position indicator housing.
- NOTICE:
-
Do not damage the lower position indicator housing.
35975 3.REMOVE POSITION INDICATOR SLIDE COVER
Remove the position indicator slide cover from the lower position indicator housing.
35976 4.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER
Remove the No. 2 position indicator slide cover from the position indicator slide cover.
35906 5.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY
*a | Clamp |
*b | Guide |
Disengage the clamp.
Disengage the 4 guides.
Remove the clamp from the transmission control switch connector.
*a | Secondary Lock |
*b | Protective Tape |
Using a screwdriver, release the secondary lock.
- HINT:
-
Tape the screwdriver tip before use.
*a | Mark |
Put mark on the wire for terminal 14.
Using SST, release the locking lugs of terminals 7 and 14, and pull the wires and terminals out of the transmission control switch connector.
- SST
- 09991-00510
35974 6.REMOVE LOWER POSITION INDICATOR HOUSING
Disengage the 4 claws to remove the lower position indicator housing from the shift lock control unit assembly.
- NOTICE:
-
Do not damage the lower position indicator housing.