DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  OPERATION CHECK  


CHECK POWER DOOR LOCK OPERATION


NOTICE:

The operation check below is based on the non-customized initial condition of the vehicle.


a.

Check basic functions.

i.

Check that all doors lock when the lock side of the door control switch is pressed.


ii.

Check that all doors unlock when the unlock side of the door control switch is pressed.


iii.

Check that all doors lock when the driver door key cylinder is turned to lock using the mechanical key.


iv.

Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.



b.

Check the key lock-in prevention function.

NOTICE:

In order to prevent the key from being actually locked-in, the following inspection should be performed with the driver door window open.


i.

Insert the key into the ignition key cylinder.


ii.

With the driver door open, check that all doors unlock immediately after the driver door lock knob is pressed.


iii.

With the driver door open, check that all doors unlock immediately after the lock side of the door control switch is pushed.


iv.

With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all doors unlock.



c.

Check the security function of the door lock control system.

i.

Close all doors and leave the driver door window open so that the door control switch can be operated from outside the vehicle. (Step 1)


ii.

Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the door lock knob. Close the driver door. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.


iii.

Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.


iv.

Starting from Step 1, with the key outside the vehicle, close and lock the driver door using the wireless door lock function. Then, check that the doors do not unlock when the unlock side of the door control switch is pressed from outside the vehicle.

HINT:

Check that the security function of the door lock control system is canceled under the following conditions:


·

The ignition switch is turned to ON.

·

The driver door is unlocked using the key.

·

The unlock side of the door control switch is pressed after the door lock knob is unlocked manually.

·

The doors are unlocked by wireless operation.