K313 CVT OIL PAN INSTALLATION
PROCEDURE
35394D 1.INSTALL OIL CLEANER (CVT) MAGNET
*1 | Oil Cleaner (CVT) Magnet |
Install the 3 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly.
35106L 2.INSTALL TRANSAXLE OIL (CVT) PAN SUB-ASSEMBLY
Clean the transaxle oil (CVT) pan sub-assembly installation surface of the continuously variable transaxle assembly.
Install a new transaxle oil pan (CVT) gasket to the transaxle oil (CVT) pan sub-assembly.
Install the transaxle oil (CVT) pan sub-assembly to the continuously variable transaxle assembly with the 16 bolts.
- Torque:
- 7.8 N*m (80 kgf*cm, 69 in.*lbf)
Using a 6 mm hexagon socket wrench, install the No. 1 transmission oil filler tube to the transaxle oil (CVT) pan sub-assembly.
- Torque:
- 1.7 N*m (17 kgf*cm, 15 in.*lbf)
Using a 6 mm hexagon socket wrench, temporarily install the overflow plug with the gasket to the continuously variable transaxle assembly.
- HINT:
-
Reuse the old gasket as the overflow plug will be removed again to adjust the fluid level.
3.ADJUST CONTINUOUSLY VARIABLE TRANSAXLE FLUID
4.INSPECT FOR FLUID LEAK
51442C 5.INSTALL ENGINE UNDER COVER LH