DOOR LOCK LUGGAGE COMPARTMENT DOOR LOCK INSPECTION
PROCEDURE
64610 1.INSPECT LUGGAGE COMPARTMENT DOOR LOCK ASSEMBLY
a.
Check the operation of the door lock motor. (w/ Wireless Door Lock Control Function)
i.
2.656,1.74 2.74,1.74
2.74,1.74 2.74,1.49
false
2.917,1.708 2.854,1.708
2.854,1.708 2.854,1.49
false
*a | Close (Lock) |
*b | Open (Unlock) |
*c | Component without harness connected
(Luggage Compartment Door Lock Assembly) |
Move the door lock to the close (lock) position.
ii.
Apply battery voltage to the door lock motor and check the operation of the door lock motor.
- OK:
Battery Connection Result Battery positive (+) → Terminal 1 (ACT+)
Battery negative (-) → Terminal 2 (E)Luggage compartment door lock motor open (unlock) operation
If the result is not as specified, replace the luggage compartment door lock assembly.
b.
Check the operation of the luggage compartment door courtesy switch.
i.
2.531,1.74 2.615,1.74
2.615,1.74 2.615,1.49
false
2.833,1.74 2.74,1.74
2.74,1.74 2.74,1.49
false
*a | Close (Lock) |
*b | Open (Unlock) |
*c | Component without harness connected
(Luggage Compartment Door Lock Assembly) |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection Condition Specified Condition 2 (E) - 3 (D+) Closed (Locked) 10 kΩ or higher 2 (E) - 3 (D+) Open (Unlocked) Below 1 Ω
If the result is not as specified, replace the luggage compartment door lock assembly.