0.167,0.167 0.333,0.333 0.167,0.167 10 false *a

*a	Component without harness connected (Sliding Roof Switch (Map Light Assembly))

Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection	Condition	Specified Condition
5 - 1	UP switch is pressed	Below 1 Ω
5 - 1	UP switch is not pressed	10 kΩ or higher
4 - 1	DOWN switch is pressed	Below 1 Ω
4 - 1	DOWN switch is not pressed	10 kΩ or higher
3 - 1	OPEN switch is pressed	Below 1 Ω
3 - 1	OPEN switch is not pressed	10 kΩ or higher
2 - 1	CLOSE switch is pressed	Below 1 Ω
2 - 1	CLOSE switch is not pressed	10 kΩ or higher

If the result is not as specified, replace the sliding roof switch (map light assembly).