SLIDING ROOF / CONVERTIBLE  SLIDING ROOF SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE SLIDING ROOF SYSTEM


HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make notes of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Slide Roof.


v.

Select the setting by referring to the table below.

Slide Roof
Tester Display Description Default Setting ECU
Front SW Auto Operation This function is used to enable or disable auto operation. ON 0:OFF,1:ON Sliding roof ECU (Sliding roof drive gear sub-assembly)
50006 10

vi.

Enter the following menus: Customize Setting / Security.


vii.

Select the setting by referring to the table below.

Security
Tester Display Description Default Setting ECU
Slide Roof Open Warning This function is used to enable or disable the sliding roof open warning. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 3