PARKING BRAKE PARKING BRAKE SWITCH INSPECTION
PROCEDURE
84550
1.INSPECT PARKING BRAKE SWITCH ASSEMBLY
a.
2.948,1.938 2.948,1.719
true
2.885,1.948 3.198,2.146
0.313,0.198
10
false
*a
| *a | Nut |
|
On |
|
Off |
Measure the resistance between the connector terminal and the nut inside the parking brake switch assembly.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - Nut | On (When shaft is not pressed) | Below 1 Ω |
| Off (When shaft is pressed) | 10 kΩ or higher |
If the value is not as specified, replace the parking brake switch assembly.