REAR SUSPENSION REAR STABILIZER BAR INSTALLATION
PROCEDURE
48812 1.INSTALL REAR STABILIZER BAR
a.
2.615,1.771 2.615,1.448
false
*a | Identification Mark |
Front of the Vehicle |
Temporarily install the rear stabilizer bar to the rear axle beam assembly with the 2 bolts and 2 nuts.
- NOTICE:
- ·
Ensure that the identification mark is on the right side of the vehicle.
·Insert the bolts with the threaded end facing the lower side of the vehicle.
b.
0.063,0.063 3.365,2.292
3.302,2.229
0.063,2.333 3.385,4.51
3.323,2.177
*A | LH Side |
*B | RH Side |
Fully tighten the 2 nuts.
- Torque:
- 230 N*m (2345 kgf*cm, 170 ft.*lbf)
- NOTICE:
-
Because the bolts have their own stoppers, do not turn the bolts. Tighten the nuts with the bolts secured.
42118 2.INSTALL REAR AXLE BEAM DAMPER
a.
Install the rear axle beam damper to the center of the rear stabilizer bar.