1ZR-FE ENGINE CONTROL SFI SYSTEM CHECK FOR INTERMITTENT PROBLEMS
- HINT:
-
Inspect the vehicle ECM using check mode. Intermittent problems are easier to detect with the GTS when the ECM is in check mode. In check mode, the ECM uses 1 trip detection logic, which is more sensitive to malfunctions than normal mode (default), which uses 2 trip detection logic.
1.
Clear the DTCs.
Click hereEngine / Hybrid System>1ZR-FE ENGINE CONTROL>SFI SYSTEM>DTC CHECK / CLEAR
2.
Switch the ECM from normal mode to check mode using the GTS.
Click hereEngine / Hybrid System>1ZR-FE ENGINE CONTROL>SFI SYSTEM>CHECK MODE PROCEDURE
3.
Perform a simulation test.
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
4.
Check and wiggle the harness(es), connector(s) and terminal(s).